|
|
VoIP/PBX Hardware
All of our VoIP servers are designed and assembled with brand name hardware from industry leading companies.
We offer a variety of connectivity options including:
- T1/PRI Cards (Digital Telephone Trunks)
- FXO/FXS Cards (Telephone POTS In and Out)
- Channel Banks
- VoIP Gateways
2u Rack Server
The 2u rack mounted server is a good choice for companies with existing 4 post rack space or rack enclosures at
least 30 inches deep. This server solution is designed to support conventional phone services using up to 144 phones
and 2 Trunks (48 digital phone lines) and/or up to 48 POTS lines (analog phone lines).
- Redundant Power Supplies
- RAID 1 Mirrored Drives
- Backup Drives
- Hot-Swap Drives
- Remote Support, Configuration, and Updates
- Offsite Backup
1u Mini Rack Server
At only 14 inches deep, our 1u mini server is an excellent low cost choice for a small business or branch office with
existing 2 post rack space or with a wall mounted rack enclosure.
While some of the expansion capabilities of our larger servers are missing,
it still retains most of the features of our larger voip servers.
It's designed to support phone systems with up to 48 telephones and up to 12 analog phone lines (POTS).
Our 1u mini server measures 16.8 inches wide, 14 inches deep, and 1.7 inches high and mounts in 19 inch standard rack space.
- Boots from primary non-volatile Flash Drive
- Runs from RAM
- Secondary Backup Flash Drive
- Hard Drive only stores call detail, logs, and daily voice mail recordings
- Boots from either Flash Drive and runs without the Hard Drive (in case of drive failure)
- Remote Support, Configuration, and Updates
- Offsite Backup
Mid-Tower
The Mid-Tower server is an excellent choice for companies without an existing rack
infrastructure. It retains the capacity and features of our 2u Rack Server in an upright package.
Our Mid-Tower measures 17 inches high, 21 inches deep, and 7 inches wide.
This server solution is designed to support conventional phone services using up to 144 phones
and 2 Trunks (48 digital phone lines) and/or up to 48 POTS lines (analog phone lines).
- Hot-Swap RAID 1 Mirrored Drives
- Hot-Swap Backup Drives
- Both digital and analog trunks supported
- Remote Support, Configuration, and Updates
- Offsite Backup
SFF Mini-Tower
Our Small Form Factor (SFF) Mini-Tower is an ideal low cost option for small businesses using analog telephone lines (POTS).
While some of the expansion capabilities of our larger servers are missing,
it still retains most of the features of our larger voip servers.
It's designed to support phone systems with up to 48 telephones and up to 24 analog phone lines (POTS).
The server measures 16 inches high, 14 inches deep, and 4.5 inches wide.
- Boots from primary non-volatile Flash Drive
- Runs from RAM
- Secondary Backup Flash Drive
- Hard Drive only stores call detail, logs, and daily voice mail recordings
- Boots from either Flash Drive and runs without the Hard Drive (in case of drive failure)
- Remote Support, Configuration, and Updates
- Offsite Backup
Power over Ethernet Switch (802.3af)
The POE managed switch allows you to expand your
voice and data switch infrastructure and power up to 24 IEEE 802.3af compliant phones from one location.
(Smaller 8 port versions are also available.)
This allows the use of a battery backed up power supply (UPS) to maintain phone service during a power outage.
- 24 10/100 Ethernet using IEEE 802.3af standard
- 2 10/100/1000 RJ-45 Gb uplink ports
- Secure management via SSH/SSL
- Extensive QoS features ideal for Voice/Video
- Intelligent traffic management with rate limiting, policing, ACLs and storm control
|